Features

• The lift

  The Mayfair Stairlift uses our wheel stop mechanism. A solid stainless steel toe guard that rises around the platform to prevent wheelchair wheels from rolling off the lift. Please see on lift barriers for more information.

  The lift table can be made to accept any cladding material, the thicker the cladding the deeper the pit depth.

  Nominal platform dimensions for this lift can vary due to site requirements. However, they are more than or equal to:

  1408 mm (l) x 1010 mm (w) x 0-999 mm (h)

  Please see the lifting actuator link for more information on the mechanism used to raise and lower the stairlift.

• The stairs

  The Mayfair Stairlift can accommodate up to seven stairs or a total rise of 999 mm.

  Please see the retracting stair technical page for more information.

• The upper landing barrier

  The Mayfair Stairlift houses an automatic rising barrier at the upper landing to protect against the fall hazard that is created when the stairs retract.

  Please see the upper landing barriers for more information.

• User type

  The Mayfair Stairlift is for wheelchair users only. Non-wheelchair users are often presented with a wheelchair to travel whilst seated on this wheelchair platform stair lift. Please see on lift barriers for more information.

• System requirements

  The Mayfair Stairlift can come with either bellows to reduce the pit depth or a solid stainless steel skirt below the lift. Please see concealing the underside of the lift for more information.

  For details on the power supply please see the lift power supply.

  For general details on the pit depth please see the lift pit.

  If the surrounding area presents a crush zone the lift table can be fitted with safety edges to detect an obstruction. Please see the crush hazards surrounding the moving lift for more information.

  Please click on the Sesame stair lift controls for more information on the controls for this style of lift.

• Variations to the Mayfair Stairlif​t​​

  The upper landing rising barrier can be replaced with an automatic gate as seen here: Regent Wheelchair Platform Stairlift.

  The permanently fixed on-lift button post can be upgraded to a rising button post that rises through the lift platform when the stairs retract. The post then retracts completely out of the site when not in use. This system with an upper landing rising barrier rather than the gate can be seen here: Knightsbridge Stair Lift.

  The permanently fixed on-lift button post can be replaced with a removable hand-held post as seen here: Kensington Stairlift in London.

  If the pit depth is an issue the Sesame Thames Stair Lift sits within a pit depth of 160mm + cladding thickness.

  If the horizontal pit depth is an issue then the Sesame Victoria Stair Lift with vertically retracting stairs may be a solution.