Udostępnij
Winda Richmond Rising Platform Lift posiada barierkę na górnym podeście oraz wznoszące się barierki na platformie.
Specifications
- Minimum horizontal pit length
- 2347 mm
- Minimum platform size
- 1738 x 1250 mm
- Maximum rise
- 2999 mm
- Minimum pit depth below lower landing
- 1600 mm + Cladding & Bedding
Features
- The Lift
The Richmond Rising Platform Lift uses automatic rising barriers that rise 1100mm on the lift to fully enclose the user. Please see On Lift Barriers for more information
The lift table can be made to accept any cladding materail, the thicker the cladding the deeper the pit depth.
Nominal Platform dimensions for this lift can vary due to site requirements, however they are more than or equal to:
1738mm (l) x 1250mm (w)x 0-2999mm (h)
Please click on The Lifting Actuator link for more information on the mechanism used to raise and lower the platform lift
- The Upper Landing Barrier
The Richmond Rising Platform Lift has an automatic rising barrier at the upper landing to protect the fall hazard that is created when the platform move down.
Please see Upper Landing Barriers for more information.
- User Type
The Richmond Rising Platform Lift is for seated users and standing pedestrians. Please see on lift barriers for more information.
- System Requirements
The Richmond Rising Platform Lift can comes with a solid stainless steel skirt below the lift. Please see concealing the underside of the lift for more information.
For details on the power supply please see the lift power supply.
For general details on the pit depth please see the lift pit.
If the surrounding area presents a crush zone the lift table can be fitted with safety edges to detect an obstruction. Please see Crush hazards surrounding the moving lift for more information.
Please see The Sesame Stair Lift Controls for more information on the controls for this style of lift.
- Variations to the Richmond Rising Platform Lift
The rising barriers can be replaced with permanent handrails as seen in the Windsor Lift in Qatar. This lift also requires a significantly shallower pit, starting at 700mm.
The Waterloo Lift shows an example of a lower cost option for seated users where the rise is less than 1000mm.
The upper landing barrier can be replaced with an automatic gate as seen here: Pimlico Lift
If retracting stairs are required with similar specifications, please see: Westminster Equality Act Lift