Key Takeaways
-
A 1.5 m rise typically requires a fully enclosed external platform lift to ensure safety and accessibility.
-
Accelerated lead times are achievable when designs, finishes, and pit dimensions are confirmed early.
-
Manual latch gates reduce pit depth and simplify emergency access.
-
Bespoke lift engineering allows matching of mesh or stainless-steel finishes to existing architecture and regulations.
Introduction
Event venues and public buildings often need rapid accessibility solutions when deadlines are tight. Sesame Access specialises in bespoke platform lifts that can be designed, approved, and manufactured on an accelerated schedule. Each lift is built to meet strict BS 6440 and BS 8300 standards, with tailored finishes and pit configurations for the project’s specific rise and location.
For additional compliance guidance, you can also review our articles on Lift Barriers and British Standards.
Why Fast-Track Projects Require Bespoke Lift Solutions
Off-the-shelf lifts can take between 20 and 34 weeks to deliver, far too long for projects facing immovable completion dates. A bespoke Sesame platform lift can be produced much faster once the core parameters are agreed.
This approach is ideal for temporary or event environments where speed, compliance, and reliability are critical.
Best Lift Options for a 1.5 m Rise
For rises around 1.5 m, two configurations stand out:
-
The Windsor Lift, a robust external access platform lift with mesh infill gates that delivers durability and excellent airflow for outdoor installations.
-
The Richmond Rising Platform Lift, which provides a sleeker finish with stainless-steel or glass balustrades for higher-end designs.
For a 1.5 m external rise, the Windsor Lift with mesh gates provides strong performance, short lead times, and minimal on-site construction requirements.
Sesame Access: Accelerated Lead Times for Bespoke Lifts
Once the design pack, pit details, and finishes are confirmed, Sesame’s engineering and production teams can move from survey to manufacture within weeks.
Key steps include:
-
Design release before month-end to secure a production slot.
-
Finish coordination to match architectural materials.
-
Manufacturing and installation scheduling to meet fixed event deadlines, even through holiday periods.
This process supports fast-track delivery for external platform lifts and other accessibility systems needing accelerated lead times.
Manual vs Automated Gates: Which Works Best?
| Feature | Manual Gates | Automated Gates |
|---|---|---|
| Speed | Immediate manual release | Slight delay for powered open/close |
| Pit Depth | Shallower (no power requirement) | Deeper for actuator housing |
| Cost | Lower overall | Higher initial cost |
| Best Use Case | Back-of-house or emergency egress | Public access or unsupervised sites |
Planning, Compliance, and Safety
All Sesame lifts are designed to comply with BS 6440 and BS 8300 accessibility standards and can integrate seamlessly with JCT contracts.
For detailed guidance on compliance, visit:
An additional external reference such as the British Standards Institution (BSI) or the Chartered Institute of Building (CIOB) can also provide helpful verification sources.
Frequently Asked Questions
What is the minimum pit depth for a 1.5 m rise lift?
Depending on the gate configuration, pit depths can start from 100 mm for manual latching systems.
Can Sesame deliver before a fixed event date?
Yes. When designs are signed off promptly, accelerated lead times allow manufacture and installation in a matter of weeks.
Which model is best for an external installation?
The Windsor Lift is specifically designed for outdoor use and is ideal for fast-track projects with 1.5 m rises.
Do these lifts meet building control requirements?
All Sesame lifts conform to BS 6440 and BS 8300 and are supported by full technical documentation for approval.
Next Steps
Facing a deadline? Discuss your project timeline with one of our Project Managers and secure your design slot early.
Book a Rapid Consultation →